MATCHFIT X-PAD (4-pack)
2X
Pack
MATCHFIT X-PAD (4-pack)
MATCHFIT X-PAD (4-pack)
2X
Pack
MATCHFIT X-PAD (4-pack)
MATCHFIT X-PAD (4-pack)
+

Included in the box:

Limited time only. Hurry while supplies last!
Use code at checkout:
What's Included:
FREE shipping on orders over $40 in the contiguous USA.

or buy separately

MATCHFIT X-PAD (4-pack)

MATCHFIT

X-PAD (4-pack)
Regular price  $13.99
Ships in 3-5 business days.
Use code at checkout:
Included in the box:

100% Satisfaction Guaranteed
If you're not 100% satisfied with your purchase, return it for FREE. Contact us if you have any questions.
X-PAD™ Technology

Like two clamps in one.

The X-PAD™ is an upgrade for MATCHFIT Dovetail Clamps that allows you to clamp in two directions at once—achieving in-line clamping with unrestricted clamp positioning.

How to use: Simply slide the X-PAD™ onto the round cap of any MATCHFIT Dovetail Clamp to add a whole new level of functionality.

Henry Wang, Microjig Founder

MATCHFIT X-PAD (4-pack)

In-line pressure with zero lift.

The X-PAD applies hold-down and in-line pressure as the clamp tightens. The combined forces keep your workpieces flat and eliminate the need for two or more different clamps

MATCHFIT X-PAD (4-pack)

Clamp round or oblong stock with ease.

The V-groove profile gives you two points of contact to clamp. Simply turn the X-PAD™90º to clamp round and oblong-profile stock with a single clamp.

Create your own clamp tracks.

With MatchFit, you're not confined to pre-set clamp positions. Carve out your custom dovetail tracks on any wooden surface, enhancing your hold-down capabilities where you need them most. The Dovetail Track System gives you all the functionality of T-track, in less time and at a fraction of the cost.

Seamless dovetail integration: All MatchFit clamps slide into any 1/2" x 14º dovetail groove, transforming your setup into a unified clamping haven for unmatched efficiency.

MATCHFIT X-PAD (4-pack)
MATCHFIT X-PAD (4-pack)
MATCHFIT X-PAD (4-pack)
MATCHFIT X-PAD (4-pack)

Use it around your whole shop.

MATCHFIT X-PAD (4-pack)
Tricky Glue-Ups

How would you clamp a 3-sided miter - band clamp? Not a chance. The X-PAD™ applies pressure to both sides of the joint, keeping it flat and square, even without a 4th side to support it. Only four Dovetail Clamps upgraded with X-PADs eliminate the need for different types of clamps.

MATCHFIT X-PAD (4-pack)
Work-Holding Like A Pro‍

Securing material without obstructing the top can be a real challenge. This is traditionally  done with a combo of bench dogs, in-line clamps, and costly end-vices. MATCHFIT Dovetail Clamps with X-PADs allow you to use spacers to hold your workpiece for any process that requires unrestricted access to the top.

MATCHFIT X-PAD (4-pack)
Safer, Cleaner Cuts

The X-PAD's Pressure Transfer Notch gives you more points of contact on the workpiece. This keeps your material firmly in place for safer, cleaner cuts with a table saw sled.

MATCHFIT X-PAD (4-pack)
MATCHFIT X-PAD (4-pack)
MATCHFIT X-PAD (4-pack)

Use it around your whole shop.

Over 30+ uses on table saws, router tables, jointers, and band saws.
MATCHFIT X-PAD (4-pack)

Router Tables

The Grr-ripper provides incredible command over your workpiece on the router table. Whether you’re using the fence or freehand routing, its powerful grip controls stock and protects your hands from dangerous spinning bits.

1
2
3
4

Features.

MATCHFIT X-PAD (4-pack)

MATCHFIT X-PAD (4-pack)MATCHFIT X-PAD (4-pack)MATCHFIT X-PAD (4-pack)

Frequently Bought Together

MATCHFIT Dovetail Clamp (2-pack)
MATCHFIT Dovetail Clamp (2-pack)
MATCHFIT Dovetail Clamp (2-pack)
MATCHFIT Dovetail Clamp (2-pack)
Regular price  $45.99
Regular price  $45.99
MATCHFIT Dovetail Clamp Pro
MATCHFIT Dovetail Clamp Pro
MATCHFIT Dovetail Clamp Pro
MATCHFIT Dovetail Clamp Pro
Regular price  $99.99
Regular price  $99.99
ZEROPLAY 360 Sled Kit
ZEROPLAY 360 Sled Kit
ZEROPLAY 360 Sled Kit
ZEROPLAY 360 Sled Kit
Regular price  $29.99
Regular price  $29.99
MATCHFIT Dovetail Router Bit (1/2"-14°)
MATCHFIT Dovetail Router Bit (1/2"-14°)
MATCHFIT Dovetail Router Bit (1/2"-14°)
MATCHFIT Dovetail Router Bit (1/2"-14°)
Regular price  $32.99
Regular price  $32.99

Got questions?

What are the recommended wood type for MatchFit Dovetail Tracks?

3/4" or thicker: Void-free quality plywood (11-ply or more, Baltic birch is best), standard MDF or seasoned hardwood.

See the MATCHFIT system in action.

Specifications.

Included in the box
Parts
Parts
  • (2x) Dovetail Clamps
Parts
  • (1) Dovetail Track Clamp® AP
  • (1) X-PAD™ Attachment
*Promo Product
Accessories Included
Weight
0.7oz
1.6lbs
1.1lbs
Package Dimensions
7.4" x 5.6" x 0.6"
7.75” x 11.5” x 1”
7.8" x 11.9" x 1.6"
Cutting Range (Table Saws)
5-3/8" (clamping)
8.5" (clamping)
Thread
Clamping Range
5-3/8" (clamping)
8.5" (clamping)
Clamping Pressure
595 lbs
595 lbs
Angle Range
5-3/8" (clamping)
8.5" (clamping)
Calibration Range
5-3/8" (clamping)
8.5" (clamping)
Requirements

Any MATCHFIT Dovetail Clamp

Any standard 14°-1/2" Dovetail Router Bit

Any standard 14°-1/2" Dovetail Router Bit

SKU

X-PAD-K4

DVC-538K2

DVC-850AP

UPC
815267010903
815267010712
815267010903
Country of Origin

Designed and made in the USA

Designed in the USA

Made in Taiwan

Designed in the USA

Made in Taiwan

Tariff Code
Patent #

10,099,398

D846365

10,099,398

D846365

MSRP
Regular price  $13.99
PROMO*
Regular price  $45.99
Regular price  $31.99

Customer Reviews.

Customer Reviews
5.0 Based on 45 Reviews
5 ★
98% 
44
4 ★
0% 
0
3 ★
2% 
1
2 ★
0% 
0
1 ★
0% 
0
Customer Photos
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • clamps
  • MICROJIG
  • X-PADs
  • grip
  • angle
  • feet
  • design
  • pressure
  • system
  • MATCHFIT
MN
02/18/2024
Mitchel N.
United States

X-Pad for better control

So-far the X-Pad does alll I want. The side pressure is genius and needed!

AH
01/01/2022
Alan H.
United States

X-Pad

Great using it to make cutting boards and great surface to clamp items down

RD
08/09/2021
Roger d.
United States

Great addition

I bought these pads to add to my older clamps so they are more versatile.

JN
08/03/2021
Joseph N.
United States

Used on cnc table

Low clamping height

08/04/2021

MICROJIG

Hey Joseph... Any chance we could get you to send us a few pictures, at support@microjig.com, of how you're using the X-Pads on your CNC table? We love seeing the creative ways people use our products! :)

VH
06/07/2021
Vladislav H.
United States

simply clever

I have used this system on my work bench It enhanced significantly its properties. Thank to designers of X-PAD.

Our Story

Family-Owned & Operated

Established 2001.

For beginners and pros alike, Microjig is reimagining an ancient craft and changing the way you work with wood.

Build your projects with more protection, more precision, and more passion. Work safer. Work smarter.

Designed in the USA by Woodworkers
Protecting Users in 37 Countries and Counting
1%  Donated toNon-Profits andCharities

It all started in a garage workshop...

Henry was working on an intricate project and was challenged with cutting thin strips on a table saw. His frustration with traditional methods sparked one of the most innovative woodworking tools to come out in decades.

After countless hours and prototypes, the Grr-ripper was born. Henry has continued to innovate, and Microjig now offers multiple unique product lines all over the world.

Wood magazine
WOOD Innovate Award
FitFinder 1/2 Gauge
WOOD Innovate Award
FitFinder Lock Miter Bit
Rated 5/5
Grr-ripper 3D Pushblock
Rated 4.8/5
MatchFit Dovetail Clamp
Best for Table Saw Safety
Grr-ripper 3D Pushblock
#1 Best Overall Push Block
Grr-rip Block Smart Pushblock
Best High-end Push Block
Grr-ripper Advanced
Best Multifunctional Push Block
Grr-ripper Complete
Award Winner
MatchFit Dovetail Clamp
Award Winner
MatchFit Dovetail Clamp AP
Award Winner
FitFinder 1/2 Gauge
Award Winner
FitFinder Lock Miter Bit
Award Winner
MatchFit Dovetail Clamp AP
Award Winner
MatchFit Ratchet Clamp AP
Registered Small Business
Minority-Owned Business
Section 889 Certified

Safety for every shop.

Your purchases help support Microjig's safety initiative to donate Grr-rippers to every public high school with a Career Technical Woodworking Program. Our objective is to raise the standards of safety for the next generation and beyond. Thank you. Work Safer. Work Smarter.

Learn More

Cart

Your cart is empty.

    Ad Blocker Detected

    Please disable ad blocker for full website functionality.

    OK