MJ SPLITTER SteelPro Thin Kerf System
or buy separately
MJ SPLITTER
Steel Pro (Thin Kerf)
Included in the box:
- (4) Thin Kerf Splitters
- (4) Kerf Keepers
- Drill Guide
- 5/32" Drill Bit
- Screws
Visit our retailers to get it by Christmas!
100% Satisfaction Guaranteed
- Priority Mail Express: No delays.
- Priority Mail: 1-2 day delay. No delays for local delivery.
- First-Class Package Service: 1-2 day delay.
THE #1 AFTERMARKET SPLITTER
The MJ SPLITTER Steel Pro easily installs on your table saw’s zero clearance insert, replacing the riving knife. It keeps your workpiece tight to the fence to prevent burning, and keep the kerf from pinching the blade, virtually eliminating kickback.
The initial concept for MJ SPLITTERS was born from our best resource - customer feedback! Shortly after the release of the GRR-RIPPER, early adopters suggested a splitter system that would provide the same functionality as their splitter/blade guard, but would allow the GRR-RIPPER to pass over it. The people spoke, and we listened! MJ SPLITTERs are now the world’s #1 aftermarket splitter system.
Steel core for ultimate stability and strength.
- Package includes (4) SPLITTERS, a drill guide, and a 5/32” drill bit.
- Designed for 3/32" thin kerf saw blades
- SPLITTERS are reversible for offsets of 0.000”, 0.003”, 0.006”, and 0.009”
- Kerf range: 0.090 - 0.118”.
Instructions for Phenolic Throat Plates - For 90 degree thru-cuts only.
Create your own clamp tracks.
With MatchFit, you're not confined to pre-set clamp positions. Carve out your custom dovetail tracks on any wooden surface, enhancing your hold-down capabilities where you need them most. The Dovetail Track System gives you all the functionality of T-track, in less time and at a fraction of the cost.
Seamless dovetail integration: All MatchFit clamps slide into any 1/2" x 14º dovetail groove, transforming your setup into a unified clamping haven for unmatched efficiency.
Better protection, better cuts.
The included precision drill guide aligns your drill with the dead center of your kerf by registering off of the kerf itself.
SPLITTERS are used in tandem to fill entire kerf.
To account for runout, the package includes 4 SPLITTERS with built-in offsets from the center of the kerf. Each side has an offset in increments of .003” to ensure a perfect fit.
The offset and orientation of the SPLITTERS can be adjusted to ensure that the kerf remains open.
Use it around your whole shop.
Features.
MJ SPLITTER SteelPro Thin Kerf System
Frequently Bought Together
MJ SPLITTER SteelPro 1/8" Full Kerf System
MJ SPLITTER SteelPro 1/8" Full Kerf System
MJ SPLITTER Replacement SteelPro Thin Kerf Splitters (Orange)
MJ SPLITTER Replacement SteelPro Thin Kerf Splitters (Orange)
MJ SPLITTER Replacement SteelPro Kerf Keepers (Orange)
MJ SPLITTER Replacement SteelPro Kerf Keepers (Orange)
What people are saying.
Works with old saws.
Simple safety.
Keeps the kerf open.
Eliminate burning and binding.
One of the best on the market.
Got questions?
Does the MJ SPLITTER system work with 12" Saw blades?
Yes, please download and read the instructions.
Will the MJ SPLITTERs fit on my zero-clearance insert?
With the blade at maximum height, you need a minimum of 2” behind the blade to install the SPLITTERs.
My zero clearance insert is phenolic. Can I still install SPLITTERs?
Yes! However, the installation process is slightly different to account for the density of the material. Watch this video to see how SPLITTERs are installed on a phenolic zero-clearance insert.
How much space behind the blade do I need?
Using MJ Splitters with Phenolic Zero-Clearance Throat Plates
Preventing Kickback on a Table Saw with MJ SPLITTER SteelPro
Specifications.
Models
Parts
- (4) Thin Kerf Splitters
- (4) Kerf Keepers
- Drill Guide
- 5/32" Drill Bit
- Screws
Parts
- (4) 1/8" Splitters
- (4) Kerf Keepers
- Drill Guide
- 7/64" Drill Bit
- Screws
Parts
- (2) 1/8" Splitters
- Drill Guide
- 7/64" Drill Bit
Table Saw
Zero-clearance insert with at least 2" behind blade at highest point
Table Saw
Zero-clearance insert with at least 2" behind blade at highest point
Table Saw
Zero-clearance insert with at least 2" behind blade at highest point
SP-2TK
SP-2
SP-0125
Designed and made in the USA
Designed and made in the USA
Designed and made in the USA
Customer Reviews.
Our Story
Family-Owned & Operated
Established 2001.
For beginners and pros alike, Microjig is reimagining an ancient craft and changing the way you work with wood.
Build your projects with more protection, more precision, and more passion. Work safer. Work smarter.
Designed in the USA by Woodworkers
Protecting Users in 37 Countries and Counting
1% Donated toNon-Profits andCharities
It all started in a garage workshop...
Henry was working on an intricate project and was challenged with cutting thin strips on a table saw. His frustration with traditional methods sparked one of the most innovative woodworking tools to come out in decades.
After countless hours and prototypes, the Grr-ripper was born. Henry has continued to innovate, and Microjig now offers multiple unique product lines all over the world.
WOOD Innovate Award
WOOD Innovate Award
Rated 5/5
Rated 4.8/5
Best for Table Saw Safety
#1 Best Overall Push Block
Best High-end Push Block
Best Multifunctional Push Block
Award Winner
Award Winner
