Over 900,000 GRR-RIPPERs sold
A complete system for quickly and securely holding work on CNC machines without interference.
Recommended By
MATCHFIT CNC Workholding Kit
MATCHFIT CNC Workholding Kit
MATCHFIT CNC Workholding Kit
BFCM Only
CNC Kit + FREE Dovetail Bit (1/2″ Shank)
Features:
- Provides multiple secure clamping options for virtually all benchtop CNC needs.
- Works with most sizes, models, and brands of benchtop CNC machines.
- No tools required for most set ups.
- Hold parts along the edges, leaving the top of the part free for machining.
- Secure parts from the top when working inside a larger blank.
What's Included:
- (1) CNC Kit
- (1) Dovetail Router Bit (1/2" Shank)
or buy separately
★ NEW PRODUCT
BFCM Only
MATCHFIT
Features:
- Provides multiple secure clamping options for virtually all benchtop CNC needs.
- Works with most sizes, models, and brands of benchtop CNC machines.
- No tools required for most set ups.
- Hold parts along the edges, leaving the top of the part free for machining.
- Secure parts from the top when working inside a larger blank.
Visit our retailers to get it by Christmas!
100% Satisfaction Guaranteed
- Priority Mail Express: No delays.
- Priority Mail: 1-2 day delay. No delays for local delivery.
- First-Class Package Service: 1-2 day delay.
ONE PROFILE, ENDLESS POSSIBILITIES
Experience the unmatched innovation of the MatchFit CNC Workholding Kit, where the ingenious low-profile design elevates your woodworking without getting in the way of your tools. It is the only clamping system that uses the MatchFit Dovetail System to securely hold stock while you work the top on your CNC, clamping table, jig, or fixture.
Virtually all CNC machines sold come with two simple hold-down clamps if any clamps at all, leaving you to figure out how to hold parts on your own. No more double-faced tape. Microjig gives you a comprehensive system for quickly and securely holding work on your CNC, whatever cuts you need to make.
Professional level workholding.
When work needs to be done across the part surface, it must be held by the edges to prevent damage to the clamps and bits. Clamps holding stock from the top is the most common holding method, and our system engages the work top and edge to prevent movement during heavy milling.
Microjig’s CNC Workholding kit uses our MatchFit Dovetail Hardware in the spoilboard we teach you how to make to fit your machine bed. This allows most setups to be done quickly with no tools.
Included in the box:
- (3) Edge Guide
- (2) Ring Clamp
- (2) Ramp Clamp
- (4) U-Pad Clamp
- Nylon mounting hardware
- FREE Spoilboard plans
Workholding without limits.
Create your own tracks: With MatchFit, you're not confined to pre-set clamp positions. Carve out your custom dovetail tracks on any wooden surface, enhancing your hold-down capabilities where you need them most. The Dovetail Track System gives you all the functionality of T-track, in less time and at a fraction of the cost.
Seamless dovetail integration: All MatchFit clamps slide into any 1/2" x 14º dovetail groove, transforming your setup into a unified clamping haven for unmatched efficiency.
Create your own clamp tracks.
With MatchFit, you're not confined to pre-set clamp positions. Carve out your custom dovetail tracks on any wooden surface, enhancing your hold-down capabilities where you need them most. The Dovetail Track System gives you all the functionality of T-track, in less time and at a fraction of the cost.
Seamless dovetail integration: All MatchFit clamps slide into any 1/2" x 14º dovetail groove, transforming your setup into a unified clamping haven for unmatched efficiency.
Works with all your MatchFit Dovetail sleds, jigs, and clamp tables.
Edge Guides
Edge Guides locate along your spoilboard to provide an accurate, low-profile origin point for easy setups, especially when repeating programs. They can also be aligned within any MatchFit Dovetail Groove.
Ring Clamps
Ring Clamps can be placed anywhere along your work table to lock and unlock your parts with just a twist of the wrist. Ring Clamps feature a unique fixed hub to eliminate loosening when in use.
Ramp Clamps
Ramp Clamps use ramps to hold parts applying force in and down to prevent movement and lifting. They feature a clamping edge that moves forward and down along a ramp to provide clamping force in two directions
U-Pad Clamps
Patent-pending U-Pads apply pressure on the top and sides at the same time, preventing both lifting and sliding. U-Pad Clamps provide superior hold for stock up to 1-1/8” (28 mm) thick.
Use it around your whole shop.
Features.
MATCHFIT CNC Workholding Kit
Ultimate Workbench Plans
Frequently Bought Together
MATCHFIT 1/4" Relief Bit
MATCHFIT 1/4" Relief Bit
MATCHFIT Dovetail Ratchet Clamp AP
MATCHFIT Dovetail Ratchet Clamp AP
ZEROPLAY Miter Bars (Double Kit)
ZEROPLAY Miter Bars (Double Kit)
MATCHFIT Jig Handle
MATCHFIT Jig Handle
What people are saying.
CNC clamping has never been this easy!
Incredibly easy and convenient to use.
Never in the way and incredibly effective.
I especially like the low profile.
Featured in Woodshop News
Got questions?
Can’t I just do the same thing with dog holes?
Not really. Dog holes only allow clamps to go through the material with the head sticking out of the bottom. Dog holes confine clamps to fixed locations, which aren’t always where you need them. Dovetail Clamps can be positioned anywhere in a dovetail track, inside the material and out of the way.
Do I need the MATCHFIT Dovetail Router Bit in order to use Dovetail Clamps and Dovetail Hardware?
Only if you value your time. Standard dovetail router bits cut to a sharp point at the top of the groove, which requires a decent amount of sanding after the track is routed. Our router bit incorporates a 1/16” roundover to automatically smooth out the top of the track in a single pass. Less time sanding means more time building.
Will MATCHFIT Dovetail Clamps and Dovetail Hardware fit into my Festool track?
The clamps will not, the hardware will, but that’s kind of missing the point. The MATCHFIT system was designed to be compatible with a standard router bit profile, so that users wouldn’t actually need metal tracks. However, some users have been known to file or grind about .005” off of the wide part of the clamp’s elbow and use them in their Festool track. Our advice is to use Festool clamps with Festool tracks, and use Dovetail Clamps for everything else.
Why is the Dovetail Hardware getting stuck?
When you tighten the Dovetail Hardware into a plywood or MDF groove, the 14 degree dovetail profile wedges the plastic head of the hardware in place in the groove.
This "locks" the hardware in place so it cannot move side to side within the dovetail groove. So you can wedge a Track Screw in place, loosen the knob, and turn a cam clamp to secure stock in ways that T-Track hardware cannot.
When you are done, just press the Track Screw or Track Nut back down into the groove to 'snap' it loose and slide it to your next task.
Can I use MDF for Matchfit tables and jigs?
Good quality plywood or MDF work just fine for the MatchFit Dovetail System. Because the clamp pressure is normally directly over the clamp head in the groove, the groove is supported and the board does not tear out. There is a video showing the process here: https://youtu.be/oHtOey0-97U
What are the recommended wood type for MatchFit Dovetail Tracks?
3/4" or thicker: Void-free quality plywood (11-ply or more, Baltic birch is best), standard MDF or seasoned hardwood.
Avid CNC Spoilboard Version 2 - Microjig Matchfit System
MatchFit CNC Workholding Kit | A Complete System for Secure, Interference-Free Workholding!
MatchFit CNC Workholding Kit | Instructional Video
2024 National Hardware Shows Coolest New Tools! Day 1 of 3
Specifications.
Parts
- (3) Edge Guide
- (2) Ring Clamp
- (2) Ramp Clamp
- (4) U-Pad Clamp
- CNC Kit Hardware
Parts
- (2x) Dovetail Clamps
Parts
Any standard 1/2 x 14º dovetail router bit
Any standard 14°-1/2" Dovetail Router Bit
Any standard 14°-1/2" Dovetail Router Bit
Works with virtually all MatchFit dovetail grooves.
CN-P1234K11
DVC-538K2
DVC-1177K2
Made in USA
Designed in the USA
Made in Taiwan
Designed in the USA
Made in Taiwan
10,099,398
D846365
Customer Reviews.
Our Story
Family-Owned & Operated
Established 2001.
For beginners and pros alike, Microjig is reimagining an ancient craft and changing the way you work with wood.
Build your projects with more protection, more precision, and more passion. Work safer. Work smarter.
Designed in the USA by Woodworkers
Protecting Users in 37 Countries and Counting
1% Donated toNon-Profits andCharities
It all started in a garage workshop...
Henry was working on an intricate project and was challenged with cutting thin strips on a table saw. His frustration with traditional methods sparked one of the most innovative woodworking tools to come out in decades.
After countless hours and prototypes, the Grr-ripper was born. Henry has continued to innovate, and Microjig now offers multiple unique product lines all over the world.
WOOD Innovate Award
WOOD Innovate Award
Rated 5/5
Rated 4.8/5
Best for Table Saw Safety
#1 Best Overall Push Block
Best High-end Push Block
Best Multifunctional Push Block
Award Winner
Award Winner
