MJ Splitter

MJ Splitter

Simple Splitter Safety. No Excuses.

GR-100B

For decades, the wood worker has been operating their table saw without a splitter. We understand that stock splitters are clumsy, cumbersome, and, most of all, difficult to reinstall and realign. We also know that after-market splitters can get quite pricey. Of course, you are taking a great risk each time you make a cut without a splitter. Kick back is always a looming danger and accidents happen. Well, with the MJ Splitter, there are no more excuses for not having a splitter on your table saw. The MJ Splitter is designed to be an affordable alternative that will dramatically increase your table saw safety. It’s simple to use design makes it easier then ever to achieve optimal safety on the table saw. No more excuses. Get safe.

Fool-Proof Installation.

GR-100B

The precision drill-guide system for the MJ Splitter makes installation a breeze. We take out the guesswork and even provide the drill-bit for you. The drill template lines up your drill perpendicular to the table saw surface and you can effortlessly drill straight lines into your Zero Clearance Insert (ZCI). The drill-guide’s ingenious design lines up your splitter to plug directly into your ZCI for quick and accurate alignment with your saw blade. Installation is so simple its Fool-proof.

Mini-Feather Board Effect.

GR-100B

Simple, exact, and extremely effective, cutting results are precise and virtually burn free when using the MJ Splitter. That’s because our splitter is the only one on the market with the “mini-feather board effect.” Each side of the splitter is offset by several thousands of an inch to give the perfect tolerance and pressure according to your cutting situation. There is a lot of engineering that goes into these little splitters, but we make it easy for you use on your table saw. Just flip the MJ Splitter around with the “plus” signs facing the fence to give your splitter the correct offset. Each “+” sign represent 0.003”; so “+++” equals 0.009”. Precision and safety do come in small packages. See it in action.

Plug N’ Play.

GR-100B

Our patented MJ Splitter system is intended for everyday use on the saw. However, for more intricate operations such as bevel cuts, dado cuts, and other cuts where the MJ Splitter may interfere, simply remove it. Micro Jig has designed the splitter to easily be removed for these types of situations. When you’re ready to make a 90 degree cut, just plug the MJ Splitter back in; it’s just that simple. The pre-drilled splitter holes in your ZCI are aligned with your table saw, so no matter how many times you take the splitters out or put them back in the MJ Splitter performs as designed—perfectly aligned, every time.

Find out more about our professional level splitters.

Thin Kerf Model

Our Thin Kerf MJ Splitters (Yellow) are specifically designed to be used with Thin Kerf saw blades. For kerf ranges between 0.090" to 0.118". Please make sure you are using the correct MJ Splitter model with the appropriat saw blade

If your not sure what type of saw blade you have, perform this simple test at your shop to find out.

1/8" Kerf Model

The 1/8" Kerf MJ Splitter (Green) is designed to be specifically used with 1/8" kerf saw blades. For kerf ranges between 0.122" and 0.145". Please make sure you are using the correct MJ Splitter model with the appropriat saw blade

If your not sure what type of saw blade you have, perform this simple test at your shop to find out.

 

See more Uses for the MJ Splitter System

Where to Buy